Jump to content


Photo

Publications and posters


  • Please log in to reply
4 replies to this topic

#1 Simon Davis

Simon Davis

    Advanced Member

  • Administrators
  • 1,116 posts

Posted 06 February 2014 - 09:23 PM

Here is a copy of a poster presented at AAPS in 2007 that can shows an example of using a custom IVIVC model Simon [file name=AAPS2007_IVIVC_Poster.pdf size=312413]http://www.pharsight.com/extranet/media/kunena/attachments/legacy/files/AAPS2007_IVIVC_Poster.pdf[/file]

Attached Files


Edited by Simon Davis, 02 March 2015 - 06:16 PM.


#2 Simon Davis

Simon Davis

    Advanced Member

  • Administrators
  • 1,116 posts

Posted 19 February 2016 - 09:30 AM

There is a short discussion of the above poster on the LearnPKPD blog;

http://learnpkpd.com...e-tip-for-pkpd/

together with a workaround tip if your custom model ever freezes.

I'd invite any readers to let us know of other publications using the IVIVC toolkit so we can add to the library of

Simon

Tips for custom IVIVC models in Phoenix
February 18, 2016 By Bayo Olowoyeye 2 Comments

Author: Simon Davis
Original Poster Link

The IVIVC tool within Phoenix is a convenient and powerful tool to build an in vivo-invitro correlation model using dissolution experiments and real in vivo profiles. This module can support your organisation in formulation development and even in applying for Biowaivers.

The tool has a flexible library of built-in models that can be modified to better fit more complicated, non-linear relationships as demonstated in the attached AAPS poster presentation.

To briefly summarise the problem was to develop an In Vitro / In Vivo Correlation (IVIVC) model for a compound whose release rate specific bioavailability would not initially seem to support an IVIVC.

The formulation under evaluation is a capsule containing four different types of delayed release beads. Each bead is are characterized by a mean dissolution time (MDT) and a time lag (Tlag) and each of the seven formulations under study is comprised of a different ratio of each bead type.



Mean plasma profiles for 4 formulations (10-20 subjects per formulation) were deconvolved using the PK parameters that would relate to the intravenous kinetics of the compound. The generated series of fraction absorbed (Fabs) profiles were then overlaid with the dissolution profiles. Reviewing this plot suggested that the slower formulations had greater bioavailability than the fastest release (CR01) and the slower the release -the greater the bioavailability.

raw_deconvolution

This meant that a simple library model could not describe the data well. Since the Levy plot indicated two time scales a bi-linear model was proposed where an initial lag (TL1) to be consistent with a stomach emptying effect together with a Tcut representing intestinal transit time switching between phases.

In this case reviewing the original exploratory plots together with the diagnostic plots an initial library model was refined to consider some physiological mechanismse.g. first pass metabolism greatest in the small intestine, thereby creating an acceptable custom IVIVC model.

customIVIVCresult

However occasionally when running a custom model you may find that IVIVC model the object freezes (you can tell when this has happened because the status bar fails to advance)

ivivc_freeze_img3

Should this happen

CTRL+SHIFT+Escape to bring up Windows Task Manager
Navigate to the Processes tab.
Try ending the wnlpk32.exe process
It should automatically restart and then complete without error
Take it as a reminder to save you Phoenix project!

Edited by Simon Davis, 15 July 2020 - 02:16 PM.


#3 Cornelia Preusse

Cornelia Preusse

    Member

  • Members
  • PipPip
  • 13 posts

Posted 15 July 2020 - 12:54 PM

There is a short discussion of the above poster on the LearnPKPD blog;

 

http://learnpkpd.com...e-tip-for-pkpd/

 

together with a workaround tip if your custom model ever freezes.

 

I'd invite any readers to let us know of other publications using the IVIVC toolkit so we can add to the library of

 

 Simon

 

Hi Simon,

 I am also having some troubles with the Syntax of the user-specified correlation coding in ASCII Format. It would be great if you could share the ASCII model script for the user-defined correlation mentioned in the poster above as an example so that I could start working on from there (the Version below doesn't work) :)

 

I'm not shure if that was provided under the link above since the page cannot be found anymore.

 

Many thanks and best regards,

Conny

 

DISS = IVINTERP(T)

IF X < Tcut THEN

F(X)=AS1*FDISS*(TS1*X-TL1)

ELSE

F(X)=F(Tcut)+AS2*(FDISS*(TS2*X-TL2)-FDISS(Tcut)



#4 Simon Davis

Simon Davis

    Advanced Member

  • Administrators
  • 1,116 posts

Posted 15 July 2020 - 02:16 PM

Hi Conny,  I used the wayback when engine to recover it ... https://web.archive....e-tip-for-pkpd/

I will edit the above post and have a look at the code later.

 Simon.



#5 Cornelia Preusse

Cornelia Preusse

    Member

  • Members
  • PipPip
  • 13 posts

Posted 21 August 2020 - 01:22 PM

Hi Simon thanks for recoevring the poster !!

Did you already had a look on the ASCII model script for the user-defined correlation, I'm having still trouble with the Syntax.

 

Many thanks, Conny






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users