Jump to content


Photo

IVIVC


  • Please log in to reply
6 replies to this topic

#1 Ramesh

Ramesh

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 23 June 2010 - 06:06 AM

Dear All,

 

Can anyone tell how to do IVIVC correlation by using Winnonlin.

 

Plese tell how to enter the data in winnonlin sheet for IVIVC.

 

Thanks & Regards

Raja



#2 Simon Davis

Simon Davis

    Advanced Member

  • Administrators
  • 1,316 posts

Posted 23 June 2010 - 07:29 AM

Raja, as I said on the BEBAC board where you first asked this question; you need to be a little more specific. Example files are given of possible formats in the WinNonlin\Examples folder. e.g. ivivc_diss.pwo, ivivc_vivo.pwo and ivivc_test.pwo.

 

Chapter 8 of the Examples guide, (at least in the 5.2.1 guide), is dedicated to stepping through this project. Then you could set up your files in a similar format, or at least you will understand some of the mapping options available to you. The key thing is to keep formulation names consistent between vitro and vivo data to ensure the program can match up the profiles.

 

Lastly there is actually a Forum for this topic already;

http://www.pharsight.com/extranet/index.php?option=com_kunena&Itemid=55&func=showcat&catid=44

 

   Best regards,

                         Simon.

 

Forthcoming meetings and training -http://www.pharsight.com/training;

Transitioning to Phoenix NLME v6.1: 8 June 2010 Berlin, Germany (prior to PAGE).

Transitioning to Phoenix v6.1: 6 Sept 2010, Amsterdam, Holland.

Introduction to Phoenix v6.1: 7-9 Sept 2010, Amsterdam, Holland.



#3 Helmut Schütz

Helmut Schütz

    Advanced Member

  • Members
  • PipPipPip
  • 316 posts
  • LocationVienna, Austria

Posted 23 June 2010 - 08:09 AM

Hi Simon!

Lastly there is actually a Forum for this topic already;
http://www.pharsight...howcat&catid=44

For both Sub-Boards of WinNonlin Classic Forum I only get "Access denied!"... ;-)

 Best regards,
Helmut

https://forum.bebac.at/


#4 Ramesh

Ramesh

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 23 June 2010 - 08:58 AM

Hi Simon,

 

link not accessible.

 

Raja



#5 pktastic

pktastic

    Member

  • Members
  • PipPip
  • 12 posts

Posted 23 June 2010 - 09:07 AM

interesting I'm logged in as a normal user and can see it. I'll start a thread there as a test.



#6 Helmut Schütz

Helmut Schütz

    Advanced Member

  • Members
  • PipPipPip
  • 316 posts
  • LocationVienna, Austria

Posted 23 June 2010 - 03:34 PM

Hi Simon!

Very strange. Couldn't post some months ago as well (see here). Didn't work couple of hours ago (see below):
Posted Image
Now it's working - did you upgrade me?

BTW, don't feed the troll...

 Best regards,
Helmut

https://forum.bebac.at/


#7 Simon Davis

Simon Davis

    Advanced Member

  • Administrators
  • 1,316 posts

Posted 23 June 2010 - 03:57 PM

Sorry but it appears that a security setting was changed on that specific forum that made it only visible to administrators. We've corrected the problem and everyone should be able to access it now. Simon.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users